Did You Know That There Are 3 Categories and Classes Which Describe Water Contamination?

5/22/2017 (Permalink)

Category 3 - Ground Water

With all the recent rain fall, did you know that there are different categories and classes which describe contaminated water?  According to the IICRC (Institute of Inspection Cleaning and Restoration Certification), which sets the standards for the cleaning industry and water damage restoration training, there are several different levels and classes around water destruction.  From the IICRC’s S-500 standards, they are as follows:

Category 1. This is water from a clean and sanitary source, such as broken water supply lines, tub or sink overflows or appliance malfunctions that involves water supply lines.  The cleanliness of Category 1 water can deteriorate quickly due to contact with building and other materials.

Category 2. This category, once referred to as grey water, contains level of contaminates that may cause illness or discomfort if ingested. Sources include toilet bowls with urine (no feces), sump pump failures, and water discharge from dishwashers or washing machines.

Category 3. This is the worst classification, once referred to as black water, is grossly contaminated and can contain pathogenic, toxigenic, or other harmful agents. If ingested it can cause severe illness or death. Sources include sewer backup, flooding from rivers or streams, toilet overflow with feces, and ground surface water or standing water that has begun to support bacterial growth.

Next are the classes of water damage which determine the probable rate of evaporation based on the type of materials affected, or wet, in the room or space that was flooded.

Class 1. Slow rate of evaporation and easiest to deal with.  Only part of a room or area was affected, there is little or no wet materials, and the moisture has only affected materials with a low permeance rate, such as plywood or concrete.

Class 2. With a fast evaporation rate, this level affects an entire room, carpeting, or cushioning, the wetness has wicked up the walls at least 12”, and there is moisture remaining in structural materials.

Class 3. This class has the fastest evaporation rate.  Ceilings, walls, insulation, carpet and sub-floors are all saturated.

Class 4. This class is labeled as specialty drying situations, which means there has been enough water and time to saturate materials with very low permeance, such as hardwood, concrete, stone, crawlspaces and plaster.

Should the unexpected happen and you are faced with a water loss, please call us at 203-267-6262.  We make it “Like it never even happened.®”